Cat® C9 Engine Bronze Overhaul Kit - 430-3914
Cat® C9 Engine Bronze Overhaul Kit - 430-3914
Description for Part Number 430-3914
The Cat® C9 Engine Bronze Overhaul Kit (430-3914) is designed to provide a cost-effective solution for in-frame engine overhauls, targeting reliability and performance while extending the engine’s life. This kit includes critical components for repairing and restoring the engine to its optimal condition.
Key Features:
- Cost-Effective Repairs: Focuses on essential components for reliable, low-cost engine maintenance.
- Improved Durability: Includes high-quality parts to ensure long-lasting performance.
- Ease of Installation: Pre-packaged kits simplify procurement and reduce downtime.
Benefits:
- Enhances engine performance and fuel efficiency.
- Maximizes engine uptime by including components for a thorough overhaul.
- Simplifies the maintenance process with all necessary parts in one kit.
Kit Includes:
| Part Name | Quantity |
|---|---|
| 280-6794: 38.1mm Inner Diameter Hose | 1 |
| 115-4072: 79.29mm Outside Diameter Sleeve Bearing | 1 |
| 0S-0519: 73.38mm Outside Diameter Non-Threaded Cup-Plug | 1 |
| 242-3864: 58.50mm Free Length Compression Spring | 2 |
| 216-5586: 65.32mm Internal Diameter Steel Sleeve Bearing | 1 |
| 203-6090: 70.10mm Outer Diameter Camshaft Sleeve Bearing | 1 |
| 430-4352: FRONT HOUSING INSTALL GASKET KIT | 1 |
| 248-5513: Water Temperature Regulator | 1 |
| 213-3190: 86mm Outside Diameter Connecting Rod Bearing | 6 |
| 240-0041: Engine Crankcase Breather | 1 |
| 347-3148: 48.00mm Minimum Internal Diameter Clamp | 2 |
| 203-5805: 70.10mm Outer Diameter Sleeve Bearing | 2 |
| 4F-5695: 51.16mm Outside Diameter Non-Threaded Cup-Plug | 4 |
| 1R-0762: Engine Fuel Filter | 1 |
| 305-0793: GASKET KIT | 6 |
| 424-1264: Flywheel Housing Gasket Kit - Rear Structure | 1 |
| 425-6640: Block & Oil Pan Gaskets Kit - Central Lower Structure | 1 |
| 430-7210: GASKET (SCH) KIT | 1 |
| 6V-5839: Flat Washer, ID X OD X T: 11 X 21 X 2.5 mm | 12 |
| 4P-4369: 11.50mm Internal Diameter Steel Spacer | 6 |
| 5P-0597: 44.45mm Minimum Internal Diameter Clamp | 1 |
| 3B-0623: 25.73mm Outside Diameter Non-Threaded Cup-Plug | 2 |
| 3E-8017: M10 x 1.5mm Cone Lock Nut | 12 |
| 033-6032: 1.78 x 26.7mm 75A FKM O-Ring | 1 |
| 326-1644: Fuel Water Separator | 1 |
| 0L-1026: 13mm Outside Diameter Non-Threaded Cup-Plug | 2 |
| 424-1361: Oil Cooler and Lines Gasket Kit | 1 |
| 428-9317: GASKET (WP) KIT | 1 |
| 116-3715: 85mm Long Taper Lock Steel Stud | 12 |
| 1W-8407: 8mm Inside Diameter Cylinder Block Sleeve | 2 |
| 467-4243: 21.266mm Inner Diameter Guide Spring | 12 |
| 1R-1808: Engine Oil Filter | 1 |
| 5P-6436: 1.78 x 29.87mm 70A VMQ O-Ring | 1 |
| 3F-5792: 3.53 x 129.77mm 75A NBR O-Ring | 1 |
Compatible Engine S/N Prefix:
- GKX; JAB; KDD; MCA; GAG; HAA; CYA; CGZ; CAP; BTM; RBH; MSD; MSL (Engine Arrangement: 1870470)
- B1K; B2L; B3M; B4N; CYA; D3C; DKY; GAG; HAA; JAB; MCA; KDD; GKX; CGZ; CAP; BTM; RBH; MSD (Engine Arrangement: 2083027)
- CAP; CGZ; JCD; JNK; MKM; MSL (Engine Arrangement: 2115020)
- GKX; JAB; KDD; MCA; GAG; HAA; CYA; CGZ;CAP; BTM; RBH; MSD (Engine Arrangement: 2342917)
- CAP; CGZ; JCD; JNK; MKM; MSL (Engine Arrangement: 2354129)
- CYA; GAG; HAA; JAB; MCA; KDD; GKX; CGZ; CAP; BTM; RBH; MSD (Engine Arrangement: 2370283)
- MSL; CAP; MSD (Engine Arrangement: 2420067)
- MSL (Engine Arrangement: 2538366)
- MSL; MSD; CAP (Engine Arrangement: 2538367)
Compatible Model List:
| Equipment | Models |
|---|---|
| EXCAVATOR | 330C L 330C LN 330C 330C FM 330C FH |
| MOBILE HYD POWER UNIT | 330C |
| MOTOR GRADER | 160H 140H 163H 143H 14H |
Part Specifications
Part # :
430-3914
Manufacturer :
Caterpillar
Inquiry
Related Parts
