Cat® C9 Engine Bronze Overhaul Kit - 430-7807
Cat® C9 Engine Bronze Overhaul Kit - 430-7807
Description for Part Number 430-7807
The Cat® C9 Bronze Overhaul Kit provides an economical solution for engine rebuilds while maintaining Cat’s durability standards. Designed for a basic rebuild, this kit includes critical components to restore engine performance and extend its operational life.
Key Features and Benefits:
- Cost-Effective Solution: Offers an affordable alternative for restoring engine reliability.
- Comprehensive Kit: Includes key rebuild components to reduce downtime.
- Genuine Cat Parts: Ensures compatibility and durability with precise fit and high-quality materials.
- Optimized Performance: Helps restore engine efficiency and prolong service life.
Kit Includes:
| Part Name | Quantity |
|---|---|
| 280-6794: 38.1mm Inner Diameter Hose | 1 |
| 115-4072: 79.29mm Outside Diameter Sleeve Bearing | 1 |
| 0S-0519: 73.38mm Outside Diameter Non-Threaded Cup-Plug | 1 |
| 242-3864: 58.50mm Free Length Compression Spring | 2 |
| 216-5586: 65.32mm Internal Diameter Steel Sleeve Bearing | 1 |
| 203-6090: 70.10mm Outer Diameter Camshaft Sleeve Bearing | 1 |
| 430-3494: Oil Cooler and Lines Gasket Kit | 1 |
| 430-4352: FRONT HOUSING INSTALL GASKET KIT | 1 |
| 248-5513: Water Temperature Regulator | 1 |
| 7C-7431: 1.03mm Thick Turbocharger Gasket | 1 |
| 6V-8397: 1.78 x 9.27mm 90A NBR O-Ring | 4 |
| 3P-1156: 3.53 x 21.82mm 75A FKM O-Ring | 3 |
| 8L-2786: 2.21 x 16.36mm 75A FKM O-Ring | 1 |
| 326-1644: Fuel Water Separator | 1 |
| 0L-1026: 13mm Outside Diameter Non-Threaded Cup-Plug | 2 |
| 423-5923: Flywheel Housing Gasket Kit - Rear Structure | 1 |
| 428-9317: GASKET (WP) KIT | 1 |
| 430-3917: Single Cylinder Head Install Kit | 1 |
| 116-3715: 85mm Long Taper Lock Steel Stud | 12 |
| 1W-8407: 8mm Inside Diameter Cylinder Block Sleeve | 2 |
| 467-4243: 21.266mm Inner Diameter Guide Spring | 12 |
| 1R-1808: Engine Oil Filter | 1 |
| 3J-1907: 1.98 x 11.89mm 90A NBR O-Ring | 3 |
| 3K-0360: 2.21 x 16.36mm 90A NBR O-Ring | 1 |
| 4J-5477: 1.78 x 7.67mm 90A NBR O-Ring | 1 |
| 5P-6436: 1.78 x 29.87mm 70A VMQ O-Ring | 1 |
| 3F-5792: 3.53 x 129.77mm 75A NBR O-Ring | 1 |
| 464-0509: 9.25mm Inside Diameter Seal-O-Ring | 1 |
| 6V-6609: 2.21 x 16.36mm 70A EPDM O-Ring | 4 |
| 213-3190: 86mm Outside Diameter Connecting Rod Bearing | 6 |
| 240-0041: Engine Crankcase Breather | 1 |
| 347-3148: 48.00mm Minimum Internal Diameter Clamp | 2 |
| 430-5439: Block & Oil Pan Gaskets Kit | 1 |
| 203-5805: 70.10mm Outer Diameter Sleeve Bearing | 2 |
| 528-5683: 220mm Outer Diameter Crankshaft Seal | 1 |
| 4F-5695: 51.16mm Outside Diameter Non-Threaded Cup-Plug | 4 |
| 1R-0762: Engine Fuel Filter | 1 |
| 305-0793: GASKET KIT | 6 |
| 6V-8398: 1.78 x 12.47mm 90A NBR O-Ring | 4 |
| 6V-5839: Flat Washer, ID X OD X T: 11 X 21 X 2.5 mm | 12 |
| 4P-4369: 11.50mm Internal Diameter Steel Spacer | 6 |
| 3B-0623: 25.73mm Outside Diameter Non-Threaded Cup-Plug | 2 |
| 2M-9780: 2.46 x 19.18mm 90A NBR O-Ring | 1 |
| 3E-8017: M10 x 1.5mm Cone Lock Nut | 12 |
| 112-5282: 16.36mm Inner Diameter O-Ring Seal | 2 |
| 033-6032: 1.78 x 26.7mm 75A FKM O-Ring | 1 |
Compatible Engine S/N Prefix:
- 125; AMZ; CBK (Engine Arrangement: 1687967; 2856123)
Compatible Model List:
| Equipment | Models |
|---|---|
| WHEEL TRACTOR | 627G 637G |
| WHEEL SCRAPER | 627G 637G |
| MOTOR GRADER | 12H 160H 140H 163H 143H 14H |
Part Specifications
Part # :
430-7807
Manufacturer :
Caterpillar
Inquiry
Related Parts
